shopping_cart
Cart
(0)
DryLine Antenna ® Dehydrator, Low-pressure membrane, wall mountable, 3.0-5.0 psig, with summary ala
$0.00
Security policy
(edit with the Customer Reassurance module)
Delivery policy
(edit with the Customer Reassurance module)
Return policy
(edit with the Customer Reassurance module)
PMT200B-81015
999999 Items
Data sheet
- /pdfs/PMT200B-81015.pdf
- docs Y
- y
- specs Y
- y
- Product Width
- 45.72 cm - 18.00 in
- Net Weight
- 19.94 kg - 43.96 lb
- gross weight, packed
- 21.82 kg - 48.10 lb
- Product Depth, Packed
- 40.64 cm - 16.00 in
- Product Height, Packed
- 55.88 cm - 22.00 in
- Product Width, Packed
- 53.34 cm - 21.00 in
- Classification
- Designed, manufactured and/or distributed under this quality management system,Below Maximum Concentration Value (MCV),Compliant
- Product Height
- 45.72 cm - 18.00 in
- Product Depth
- 17.78 cm - 7.00 in
- Operating Temprature
- -10 °C to +40 °C (+14 °F to +100 °F)
- Dehydrator Type
- Automatic Membrane
- Volume Capacity, maximum
- 1699.00 L - 60.00 ft³
- Power Cord
- Europe power cord with stripped leads
- Mount Type
- Floor - Shelf - Wall
- Port Count
- 4
- Port Type
- 3/8 in PE tube
- Volume Capacity, minimum
- 0.00 m³ - 0.01 ft³
- Voltage
- 115 Vac ±10%
- Power Consumption
- 184.0 W
- Power Frequency
- 60/50 Hz
- Power Phase
- Single
- Suggested Curcuit Breaker Size
- 20 A
- Voltage Type
- ac
- Dew Point
- Better than -45 °C (-50 °F) at 95% RH at +40 °C (+104 °F)
- Flow Rate
- 5.66 SLPM - 0.20 SCFM
- Regulated Output Pressure Type
- factory set
- Regulated Output Pressure, maximum
- 34.5 kPa - 5.0 psig
- Alarm Type
- Summary
- Low-Pressure Alarm
- 68 mbar - 7 kPa - 1 psig
- Alarm Contact Rating
- Form C dry contacts, 2 amps at 30 Vdc
- Circuit Breaker Requirement
- Electrical connections require separate circuits for dehydrator installation
- Agency
- ISO 9001
Comments (0)
No customer reviews for the moment.
16 other products in the same category:
Viewed products
