DryLine Antenna Â® Dehydrator, Low-pressure membrane, 19 in rack mountable, 2.0-5.0 psig, with discr

$0.00

Security policy

(edit with the Customer Reassurance module)

Delivery policy

(edit with the Customer Reassurance module)

Return policy

(edit with the Customer Reassurance module)

Product Details

Reference MOJAVE2A

In stock 999999 Items

Data sheet

PDF: /pdfs/MOJAVE2A .pdf
docs Y: y
specs Y: y
Includes: 3/8 in polyethylene tubing - 90º elbow fitting - Male connector fitting - Needle valve - Power cord - Power cord connector lock - PTFE tape - Screws
Product Width: 48.18 cm - 17.00 in
Net Weight: 11.79 kg - 26.00 lb
Product Depth, Packed: 43.18 cm - 17.00 in
Product Height, Packed: 42.55 cm - 16.75 in
Product Width, Packed: 58.42 cm - 23.00 in
Product Height: 22.23 cm - 8.75 in
Product Depth: 25.40 cm - 10.00 in
Operating Temprature: -10 °C to +40 °C (+14 °F to +100 °F)
Dehydrator Type: Automatic Membrane
Volume Capacity, maximum: 1699.00 L - 60.00 ft³
Power Cord: Europe power cord with stripped leads
Mount Type: Floor - Rack - Shelf - Wall
Port Count: 1
Port Type: 3/8 in PE tube
Volume Capacity, minimum: 42.48 L - 1.50 ft³
Voltage: 240 Vac ±10%
Power Consumption: 320.0 W
Power Frequency: 60/50 Hz
Power Phase: Single
Suggested Curcuit Breaker Size: 20 A
Voltage Type: ac
Dew Point: Better than -45 °C (-50 °F) at 95% RH at +40 °C (+104 °F)
Flow Rate: 4.20 SLPM - 0.15 SCFM
Cut In Pressure: 13.79 kPa - 2.00 psig
Alarm Type: Discrete
Excess-Run Alarm: 10 minutes, factory set
Low-Pressure Alarm: 68 mbar - 7 kPa - 1 psig
Alarm Contact Rating: Form C dry contacts, 2 amps at 30 Vdc
Circuit Breaker Requirement: Electrical connections require separate circuits for dehydrator installation
Cut In/Out Pressure Type: factory set
High-Humidity Alarm: 7.5% RH, factory set
Power-Fail Alarm: Loss of input power
Cut Out Pressure: 34.47 kPa - 5.00 psig
Rack Type: EIA 19 in
Rack Units: 5